SEG Lightbox SLB-12-D
SEG Lightbox SLB-12-D is suitable for indoor tradeshow,commercial promotion,display hall.
Head: transformer and plastic connector is on the head
Tail: plastic connector is on the tail
LED strip installation (head)
The LED strips are fixed between frame and support bar by plastic connectors.
Slide the top of LED strip into the plastic connector.
There is a transformer on the head of strip.
LED strip installation (tail)
The LED strips are fixed between top and support bar by plastic connectors.
Slide the tail of LED strip into the plastic connector.
Plug, switch, wide base
The plug and switch is on the base of lightbox.
Three hole plug is used to prevent electric shock.
The wide base can support the lightbox firmly.
Mortise and tenon joint
We use mortise and tenon joint to connects two pieces of frame firmly.
Insert tenon into the mortise(the hollow aluminum frame).
Steel sheet for reinforcement
Put the steel sheet on the corner of the frame, then tighten the screws to reinforce the frame.
The aluminum frame thickness is 120mm.
Silicon strips are sewn on the perimeter of graphic.
Press the silicon strip into the groove of channel bar.
The SEG graphic make it easy to change or install graphic.
The groove on the frame perimeter for SEG graphic installation is 5.5mm wide.
The groove on the frame perimeter for SEG graphic installation is 15.5mm deep.
Graphic is printed by 6 color UV printer make it more bright-coloured